Polycom ip 6000 updating initial configuration

In this guide I will outline the steps needed in order to install Asterisk Now and setup automatic configuration and firmware provisioning for your Polycom Sound Point IP 335 and 550 SIP phones.The first step is to download the ISO image from here.If you don’t know what a Virtual Machine is then just disregard that last statement!To upgrade Free PBX select Module Admin from the Setup menu.

To do this click on the Administrators link in the Setup menu.You will need to configure a boot server to host the SIP software, Boot ROM, and all the config files (these are included in with the SIP software).You can download these from Polycom's product support page: means the phone's SIP application has been erased.New users get to try the service completely Free afterwhich it costs per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).Make sure you have the latest Boot ROM and SIP config files for this polycom(sip.ld, sip.cfg, etc...) on your TFTP server.

Leave a Reply